The US MOWER Super Samurai EX40SS Shredder / Flail Mower best fits excavators & backhoes ranging from 4,990 to 11,340 Kg units with oil flows from 57 to 132 Litres Per Min.
The EX40SS Samurai features the Super Samurai electronic balanced rotor shaft complete with a grouping of (3) 1 Kg knives per tower making mulch out of vegetation like black berry bramble, trees up to 4” Diameter, grass, weeds and other of vegetation economically and affordable.
General Specifications
· Cutting Width 1016mm (40”)
· Vegetation mowing Capacity – 102mm (4”)
· Rotation speed – 1800 – 2,000 RPM
· Electronic Balanced Rotor Super Samurai Shaft: 70,000 psi yield 5” OD x 3/8” in Wall
· Replaceable ‘HARDOX’ skid shoes
· Direct –drive hydraulic gear motor
· DOMEX Steel Construction, 3/8” reinforcements with 3/8” End Plates
· Shredder / flail knives: (24) 8” Long x 3” Wide x 10mm Thick x 1 Kg each
· Thatch knives: (12) 8” Long x 3” Wide x 10mm Thick x 1 Kg each
· Safety Yellow Powder Coat Finish
· Hydraulic Flow required: 57 – 132 Litres/Min
· Operation Weight: 323 Kg
· 2.6m Case Line included as Standard – NO Charge
· Bolt on, Pin or Quick Attachment Mount included (2) 2.2m hoses & 3/4“ male Flat-Face couplers – NO Charge
· MOUNT: Purchaser to Specify Full Details when Ordering – NO Charge
· PURCHASER must Specify the HYDRAULIC Litre Flow Rate and PSI when Ordering
· 12 Months Warranty
· OPTIONAL: THUMB available on request when Ordering
· OPTIONAL: – Ground Roller Assembly when Ordering
The US MOWER Super Samurai EX40HDSS Shredder / Flail Mower best fits excavators & backhoes ranging from 7,257 Kg to 11,340 Kg with oil flows from 60 to 133 Litres Per Min.
The Super Samurai series is reinforced with 3/8 in. DOMEX Steel end plates and the top Strong-back along with the Super Samurai electronic balanced rotor shaft.
The unit is finished out with a grouping of (3) 1 Kg knives per tower to take the day in day out rigorous use of vegetation and brush mowing.
General Specifications
· Cutting Width 1016mm (40”)
· Vegetation mowing Capacity – 153mm (6”)
· Rotation speed – 1800 – 2,000 RPM
· Electronic Balanced Rotor Super Samurai Shaft: 70,000 psi yield 6” OD x 1/2” in Wall
· Replaceable ‘HARDOX’ skid shoes
· Direct –drive hydraulic gear motor
· DOMEX Steel Construction, 3/8” reinforcements with 3/8” End Plates
· Shredder / flail knives: (24) 8” Long x 3” Wide x 10mm Thick x 1 Kg each
· Thatch knives: (12) 8” Long x 3” Wide x 10mm Thick x 1 Kg each
· Safety Yellow Powder Coat Finish
· Hydraulic Flow required: 60 – 133 Litres/Min
· Operation Weight: 522 Kg
· 2.6m Case Line included as Standard – NO Charge
· Bolt on, Pin or Quick Attachment Mount included (2) 2.2m hoses & 3/4“ male Flat-Face couplers – NO Charge
· MOUNT: Purchaser to Specify Full Details when Ordering – NO Charge
· PURCHASER must Specify the HYDRAULIC Litre Flow Rate and PSI when Ordering
· 12 Months Warranty
· OPTIONAL: THUMB available on request when Ordering
· OPTIONAL: – Ground Roller Assembly when Ordering
