Model 1014 (Buy original not a copy)

 Unlike other Brands our Bearings will last much longer than 12 months and our turner drum wont bend. With 35 years of manufacturing Sittler have done the hard yards when it comes to research and development, not a copy of someone else’s hard work.  

 

 

Quality, Consistent, Pathogen Free Compost
Built to Endure Harsh Weather Conditions
More Efficient than a Bucket Loader
Innovative, Aggressive Mixing 
Accelerate Digestion of Compost
Rejuvenate Contaminated Soil
Tough Rotor Teeth/Blades
Easy to Use

 

Powerful, reliable, efficient, economical, low-maintenance, and long-lasting. Extra-hardened, replaceable steel blades are uniquely positioned on the drum to allow for complete blending right to the base of the windrow. Material from the outside is brought inward and from the bottom to the top forming a peak position, allowing the windrow to have a chimney effect for CO2/oxygen flow.

 

The NEW Sittler 1014 windrow turner is designed for high volume compost operations. With a heavy-duty rotor drive shaft, larger rotor, and wider, sturdier drum blades this rugged machine offers a capacity of up to 2064 cubic meters/hour, turning 34 cubic meters per minute. The hydraulically operated outside drive wheel can be raised and lowered as required to eat through heavy loads. A peaked front with a reinforced steel roof maintains tunnel shape and windrow height capacity.

 

Unlike competitors the 1014 Sittler windrow turner has excellent clean-up behind the drum moving all particles from the outside in and from the bottom to the top. We offer high performance, thorough mixing, incomparable capabilities and efficient, reliable, low-maintenance. The 1014 comes with standard watering system and remote water shut-off. The new Sittler 1014 compost windrow turner can be shipped on a standard flatbed or high-cube container.

 

Standard water spray system with galvanized elbows. 4 water spray nozzles inside the compost processing area, known as the tunnel, allow for appropriate adjustable moisture to be applied to the compost.

 

Special housing encloses the bearings and shaft to protect the mechanisms from dust and debris.

 

Right hand shield is removable. PTO – right hand end is a shear bolt arrangement with shear bolt protection.

 

Optional threading frame allows the operator to raise and lower the compost cover or fleece. The machine has a dry roller which rolls by friction. Covers help retain moisture and N.


                              

SPECIFICATIONS
SITTLER 512
Total Width
 6500mm
Rotor Length  (windrow width)
4300 mm
Total Weight
4320kg
Tyre Size
30 x 57 x 112 cm truck tyre.
Tractor Horsepower ##
125 – 160 hp
PTO Speed
1000 rpm
Rotor Speed
305 rpm
Hydraulic outlet required
5
Speed required
Creeper
Minimum speed required 275-350 m/hr
 Output cubic metres/minute 35 m2 
Output cubic metres/hr 2077 m2
Watering provision standard
Fleece Roller standard
Please contact us for latest pricing                       Phone  1300.723.026
 
## Note: Recommended HP is listed as a guide only – HP can vary from model to model and will be affected by the creeper gear and/or hydrostatic drive of each tractor. Operating machinery must have a Creeper Gear or a ground speed of down to 15 and up to 20 Feet (4.5 to 6.1 Meters) Per Minute, as per the manufacturer’s manual.Any SITTLER Windrow Turner being operated with machinery more than 20HP over specification shown above will have limited warranty.